Multi Strand Copper Wire Manufacturers – XMWC2P Circuit Breaker Wire Component with Terminals – Ximu

Introduction

These electrical wiring devices are designed to quickly and automatically isolate a circuit when it detects that the electric current is unbalanced between the supply and return conductors of a circuit. Any difference between the currents in these conductors indicates leakage current, which presents a shock hazard. RCDs are designed to disconnect the conducting wires (“trip”) quickly enough to potentially prevent serious injury to humans, and to prevent damage to electrical devices.RCDs are testable and resettable devices—a test button safely creates a small leakage condition, and another button resets the conductors after a fault condition has been cleared. Some RCDs disconnect both the energized and return conductors upon a fault (double pole), while a single pole RCD only disconnects the energized conductor. If the fault has left the return wire “floating” or not at its expected ground potential for any reason, then a single-pole RCD will leave this conductor still connected to the circuit when it detects the fault.

Details

1.5mm²

2.5mm²

3mm²

4mm²

5mm²

6mm²

FAQ

1.Q: Can you offer mould making services?

A: We have made many mould for different customers for years.

2.Q: How about the guarantee period?

A: It varies according the different kinds of product. We can negotiate it before place an order.

3.Q: How about the scale of your factory?

   A: Our total area is 7200 square meter. We have 150 staffs, 20 sets of punch machines, 50 set of riveting machines, 80 sets of point welding machines and 10 sets of automation equipment.

4.Q: What is the cost for the customized mould? Will it be returned?

   A: The cost varies according to the products. And I can be returned depends on agreed terms.