China wholesale Zinc Electroplating Factories – Arc chamber for air circuit breaker XMA7GR-2 – Ximu

Introduction

The mechanism of arc chamber is used to form a cavity to discharge gas outward,so the high-temperature gas can be discharged quickly, and the arc can be accelerated to enter the arc chamber.  The arc is divided into many serial short arcs by metal grids, and the voltage of each short arc is reduced to stop the arc.  The arc is drawn into the arc chamber and cooled by grids to increase the arc resistance.

Details

Mode No.: XMA7GR-2

Material: IRON DC01, BMC,INSULATION BOARD

Number of Grid Piece(pc): 13

Weight(g): 820

Size(mm): 93*64.5*92

Electroplating: The grid piece can be plated by zinc, nickel or other kinds of cladding material as customer required.

Place of Origin: Wenzhou, China

Applications: MCB, miniature circuit breaker

Brand Name: INTERMANU or customer’s brand as required

Samples: Samples are free, but customer need to pay for the freight charge

Lead Time: 10-30 days is needed

Packing: Firstly they will be packed in poly bags and then cartons or wooden pallet

Port: Ningbo, Shanghai, Guangzhou and so on

MOQ: The MOQ depends of different kinds of product

Product Characteristic

There must be a certain tilt when rivet the grids, so that the gas exhausting will be better.  It can also benefit in lengthening the short arc during the arc extinguishing.

The support of arc chamber grid is made of melamine glass cloth board, melamine formaldehyde plastic powder, red steel board and ceramics, etc.  And vulcanized fiber board,polyester board, melamine board, porcelain (ceramics) and other materials are more used overseas.  vulcanized fiber board is poor in heat resistance and quality, but the vulcanized fiber board will release a kind of gas under arc burning, which helps to extinguish the arc;  Melamine board performs better, the cost is relatively high, and ceramics can not be processed, the price is also expensive.