China wholesale Air Circuit Breaker Arc Chute Factories – Arc chute for ACB XMA2RL/XMA2RS – Ximu

Introduction

The mechanism of arc chamber is used to form a cavity to discharge gas outward,so the high-temperature gas can be discharged quickly, and the arc can be accelerated to enter the arc chamber.  The arc is divided into many serial short arcs by metal grids, and the voltage of each short arc is reduced to stop the arc.  The arc is drawn into the arc chamber and cooled by grids to increase the arc resistance.

Details

Mode No.: XMA2RL

Material: IRON DC01, BMC

Number of Grid Piece(pc): 16

Weight(g): 1978

Size(mm):144*89*140

Cladding: NICKEL

Mode No.: XMA2RS

Material: IRON DC01, BMC

Number of Grid Piece(pc): 16

Weight(g): 1532

Size(mm): 141*68*143

Cladding: NICKEL

Electroplating: The grid piece can be plated by zinc, nickel or other kinds of cladding material as customer required.

Place of Origin: Wenzhou, China

Applications: MCB, miniature circuit breaker

Brand Name: INTERMANU or customer’s brand as required

Samples: Samples are free, but customer need to pay for the freight charge

Lead Time: 10-30 days is needed

Supply Ability: 30,000,000 per month

 Packing: Firstly they will be packed in poly bags and then cartons or wooden pallet

Port: Ningbo, Shanghai, Guangzhou and so on

Surface Treatment: Zinc, Nickel, copper and so on

MOQ: The MOQ depends of different kinds of product

Production Process: Riveting & Stamping

Installation: Manual or automatic

Mould Customization: We can make mould for customers.

Our Advantages

1. Mature Technology

① We have technicians and toolmakers who can develop and design all kinds of arc chamber according to different requirements in the shortest time. All you need to do is to offer samples, profile or drawings.

② Most of the productions are automatic which can lower the cost.

2.Complete Range of Products

Full range of arc chambers for miniature circuit breakers, moulded case circuit breakers, earth leakage circuit breaker and air circuit breakers.

3.Quality Control

We control the quality by many inspections. Firstly we have a incoming inspection for the raw material. And then process inspection for the rivet and stamping. Finally there is final statistical audit which consisting the measurement of sizes, tensile test and coat examine.