Wire In Elcb Supplier – XMWC4P Circuit Breaker Wire Component with Terminals – Ximu
Wire In Elcb Supplier – XMWC4P Circuit Breaker Wire Component with Terminals – Ximu Detail:
Introduction
RCDs are designed to disconnect the circuit if there is a leakage current.The most common modern application is as a safety device to detect small leakage currents and disconnecting quickly enough to prevent device damage or electrocution. They are an essential part of the automatic disconnection of supply.To prevent electrocution, RCDs should operate within 25–40 milliseconds with any leakage currents[clarification needed] (through a person) of greater than 30 mA, before electric shock can drive the heart into ventricular fibrillation, the most common cause of death through electric shock. By contrast, conventional circuit breakers or fuses only break the circuit when the total current is excessive (which may be thousands of times the leakage current an RCD responds to). A small leakage current, such as through a person, can be a very serious fault, but would probably not increase the total current enough for a fuse or overload circuit breaker to isolate the circuit, and not fast enough to save a life.
Details
1.5mm2
3mm2
4mm2
5mm2
6mm2
Our Advantages
1. Product Customization
Custom MCB parts or components are available upon request.
① How to customize the MCB parts or components?
Customer offers the sample or technical drawing, our engineer will make few samples for testing in 2 weeks. We will start making the mould after customer checks and confirms the sample.
② How long we take to make a new MCB parts or components？
We need 15 days to make sample for confirming. And making a new mould needs about 45 days.
2. Mature Technology
① We have technicians and toolmakers who can develop and design all kinds of MCB parts or components according to different requirements in the shortest time. All you need to do is to offer samples, profile or drawings.
② Most of the productions are automatic which can lower the cost.
3.Quality Control
We control the quality by many inspections. Firstly we have a incoming inspection for the raw material. And then process inspection for the rivet and stamping. Finally there is final statistical audit.
Product detail pictures:
Related Product Guide:
Cooperation
We pursue the administration tenet of "Quality is remarkable, Services is supreme, Status is first", and will sincerely create and share success with all customers for Wire In Elcb Supplier – XMWC4P Circuit Breaker Wire Component with Terminals – Ximu, The product will supply to all over the world, such as: Mexico, Macedonia, Bangladesh, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.
By May from Leicester - 2017.12.19 11:10
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Madeline from Portugal - 2018.09.29 17:23
